NASA’s Perseverance rover sends sneak peek of Mars landing

After landing, two of the Hazard Cameras (Hazcams) captured views from the front and rear of the rover, showing one of its wheels in the Martian dirt

NASA’s Perseverance rover sends sneak peek of Mars landing
  • The Perseverance team were relieved to see the rover’s health reports
  • The rover reports showed everything appeared to be working as expected
  • Unlike with past rovers, the majority of Perseverance’s cameras capture images in color

Less than a day after NASA‘s Mars 2020 Perseverance rover successfully landed on the surface of Mars, engineers and scientists at the agency’s Jet Propulsion Laboratory in Southern California were hard at work, awaiting the next transmissions from Perseverance. As data gradually came in, relayed by several spacecraft orbiting the Red Planet, the Perseverance team were relieved to see the rover’s health reports, which showed everything appeared to be working as expected.

AfrikaansShqipአማርኛالعربيةՀայերենAzərbaycan diliEuskaraБеларуская моваবাংলাBosanskiБългарскиCatalàCebuanoChichewa简体中文繁體中文CorsuHrvatskiČeština‎DanskNederlandsEnglishEsperantoEestiFilipinoSuomiFrançaisFryskGalegoქართულიDeutschΕλληνικάગુજરાતીKreyol ayisyenHarshen HausaŌlelo Hawaiʻiעִבְרִיתहिन्दीHmongMagyarÍslenskaIgboBahasa IndonesiaGaeligeItaliano日本語Basa Jawaಕನ್ನಡҚазақ тіліភាសាខ្មែរ한국어كوردی‎КыргызчаພາສາລາວLatinLatviešu valodaLietuvių kalbaLëtzebuergeschМакедонски јазикMalagasyBahasa MelayuമലയാളംMalteseTe Reo MāoriमराठीМонголဗမာစာनेपालीNorsk bokmålپښتوفارسیPolskiPortuguêsਪੰਜਾਬੀRomânăРусскийSamoanGàidhligСрпски језикSesothoShonaسنڌيසිංහලSlovenčinaSlovenščinaAfsoomaaliEspañolBasa SundaKiswahiliSvenskaТоҷикӣதமிழ்తెలుగుไทยTürkçeУкраїнськаاردوO‘zbekchaTiếng ViệtCymraegisiXhosaיידישYorùbáZulu

Adding to the excitement was a high-resolution image taken during the rover’s landing. While NASA’s Mars Curiosity rover sent back a stop-motion movie of its descent, Perseverance’s cameras are intended to capture video of its touchdown and this new still image was taken from that footage, which is still being relayed to Earth and processed.

Unlike with past rovers, the majority of Perseverance’s cameras capture images in color. After landing, two of the Hazard Cameras (Hazcams) captured views from the front and rear of the rover, showing one of its wheels in the Martian dirt. Perseverance got a close-up from NASA’s eye in the sky, as well: NASA’s Mars Reconnaissance. Orbiter, which used a special high-resolution camera to capture the spacecraft sailing into Jezero Crater, with its parachute trailing behind. The High Resolution Camera Experiment (HiRISE) camera did the same for Curiosity in 2012. JPL leads the orbiter’s mission, while the HiRISE instrument is led by the University of Arizona.

Several pyrotechnic charges are expected to fire later on Friday, releasing Perseverance’s mast (the “head” of the rover) from where it is fixed on the rover’s deck. The Navigation Cameras (Navcams), which are used for driving, share space on the mast with two science cameras: the zoomable Mastcam-Z and a laser instrument called SuperCam. The mast is scheduled to be raised Saturday, Feb. 20, after which the Navcams are expected to take panoramas of the rover’s deck and its surroundings.

In the days to come, engineers will pore over the rover’s system data, updating its software and beginning to test its various instruments. In the following weeks, Perseverance will test its robotic arm and take its first, short drive. It will be at least one or two months until Perseverance will find a flat location to drop off Ingenuity, the mini-helicopter attached to the rover’s belly, and even longer before it finally hits the road, beginning its science mission and searching for its first sample of Martian rock and sediment.

CATEGORIES